Large cherry picker with JIB ForSte 75TJJ
MAX BASKET FLOOR HEIGHT
74,50 m
TURRET ROTATION
700º
OUTRIGGERS
HE+HE
BASKET FLOOR HEIGHT
72,50 m
DIMENSIONS
230/360x90x110 cm
CONTROLS
Electric
MAX OUTREACH
39,50 m
BASKET
Aluminium
GVW
32 tn
BASKET PAYLOAD
600 kg
BASKET ROTATION
180º+180º
WINCH
1500/2500 Kg
High performance
Double JIB
Robustness with great mobility
Multi-zone stabilization system
Winch possibility
The large cherry picker 75TJJ is an aerial work platform with a jib that can be installed on trucks with p.t.t. minimum from 32 tons. This model is provided with a secondary boom that allows the equipment to perform maneuvers that would not be possible with a basket with only one JIB
It reaches a working height of 74,50m and a horizontal reach of 39,50m, in addition has a large load capacity of 600 kg (6 operators + material)
This model is equipped as standard, on the platform controls, with an LCD screen (7 ″) that allows the operator to control different information such as: 2D work area, limiter status, stabilizers status, etc.
The large cherry picker 75TJJ is equipped as standard with a multi-zone stabilization system that allows the operator to choose between different options depending on the available space for the truck; In addition, the rear stabilizing crossmembers have 2 hydraulic extensions that increase the stabilization area and, therefore, the maximum performance of the equipment.
Great versatility in a large cherry picker
The emergency controls are remotely controlled by radio control to allow the operator to position himself according to the best point of visibility of the entire assembly during the maneuver.
The rotation of the aerial part is 700º, this feature increasing the productivity of the truck by avoiding downtime due to repositioning of the platform. The large cherry picker 75TJJ can be equipped with a boom mounted hydraulic winch, with a capacity of 1500/2500 Kg, to be used as a crane after removing the aluminum basket..
The dimension of the aluminum basket is 2300 x 900 x h 1100 mm, expanding hydraulically to 3600 mm to increase the workspace. The rotation of the basket is 360º (180 ° left + 180 right) allowing great versatility of positioning for the job, even under a bridge
STANDARD EQUIPMENT
TECHNICAL FEATURES
- SOCAGE convertible basket possibility (Eternit)
- 2nd Jib 180 ° manual rotation
- Automatic stabilization
- Partially stabilized working areas
- Automatic closing
- Basket control station with console on Socage design including joystick and 7 “LCD display with real-time information
- Walkie Talkie
- Main and auxiliary motor start / stop control from the basket
- Multifunction radio control for ground emergency control of the aerial part and stabilization
- Electric hour counter
- Automatic PTO disengagement
- N ° 2 fixed roto-lamp on the vehicle cabin
- 230V / 400V electrical socket
- Heat exchanger on the hydraulic system
- 2 folding sides, 2 fixed (h 150 mm)
- 4 ground support plates (700 x 700 x 50 mm)
- Anti-corrosion treatment on unpainted components
Optional
– Winch 1500/2500kg
SAFETY DEVICES
- SSW Socage Safe Workplace: safety light on the aerial parts
- Emergency and stop button
- Cross-check of open stabilizers
- Anemometer
- Load limiter in the basket
- Moment limiter with double safety and control of correct operation
- Multi axial device for visual control of frame stabilization
- Emergency descent with electric pump (in the absence of the auxiliary motor)
- Rotation brake of the turret with automatic insertion
- Hydraulic system with differentiated filtering with high efficiency filters both on the delivery lines and on the return lines
- Multifunction radio control for emergency control
- Automatism for rotation lock with extension of the stabilizers on one side only
- Chassis flatness sensor
- Flanged block valves
- Working lights under the basket
- Electrical hours-counter
- Working lights on the aerial part
ASSEMBLY AVAILABLE ON
(*) Customer’s choice
CUSTOMIZE YOUR LARGE CHERRY PICKER
Our story began 40 years ago
